-40%
Dayton Speed Reducer 4RP69, 30:1, C-Face, 56C, 1750 RPM, 1.5 HP, 5/8
Dayton Speed Reducer 4RP69, 30:1, C-Face, 56C, 1750 RPM, 1.5 HP, 5/8
Dayton Speed Reducer 4RP69, 30:1, C-Face, 56C, 1750 RPM, 1.5 HP, 5/8
Dayton Speed Reducer 4RP69, 30:1, C-Face, 56C, 1750 RPM, 1.5 HP, 5/8
Dayton Speed Reducer 4RP69, 30:1, C-Face, 56C, 1750 RPM, 1.5 HP, 5/8
Dayton Speed Reducer 4RP69, 30:1, C-Face, 56C, 1750 RPM, 1.5 HP, 5/8
Dayton Speed Reducer 4RP69, 30:1, C-Face, 56C, 1750 RPM, 1.5 HP, 5/8
Dayton Speed Reducer 4RP69, 30:1, C-Face, 56C, 1750 RPM, 1.5 HP, 5/8

Dayton Speed Reducer 4RP69, 30:1, C-Face, 56C, 1750 RPM, 1.5 HP, 5/8" Bore

$ 184.77

Availability: 100 in stock
  • All returns accepted: Returns Accepted
  • Restocking Fee: No
  • Brand: Dayton
  • MPN: 4RP69
  • Item must be returned within: 30 Days
  • Return shipping will be paid by: Buyer
  • Refund will be given as: Money Back
  • Condition: New, never used. Some exterior wear from handling and storage, including scratches and scuffs. There is minor oxidization to the shaft. Additionally, there are several deep scratches around the edge of the shaft coupling, nothing which would impact structural integrity or functionality.

    Description

    New, never used. Some exterior wear from handling and storage, including scratches and scuffs. There is minor oxidization to the shaft. Additionally, there are several deep scratches around the edge of the shaft coupling, nothing which would impact structural integrity or functionality.
    Technical Specifications
    Speed Reducer
    Speed Reducer Type:
    C-Face
    Shaft Orientation:
    Right Angle
    Duty:
    Standard
    Input RPM:
    1750
    Nominal Output RPM:
    58
    Worm Center Distance:
    3.00"
    Bore Diameter:
    5/8"
    Frame:
    56C
    Overhung Load:
    967 lb.
    Nominal Ratio:
    30:1
    Maximum Input HP:
    1.5
    Maximum Output Torque:
    1245 in.-lb.
    Output Torque @ 1/2 HP:
    370 in.-lb.
    Output Torque @ 3/4 HP:
    589 in.-lb.
    Output Torque @ 1.0 HP:
    808 in.-lb.
    Output Torque @ 1.5 HP:
    1245 in.-lb.
    Number of Stages:
    1
    Rotation:
    Forward/Reversible
    Mounting:
    Any Position Except Input Motor Shaft Up
    Lubrication:
    Klubersynth UH1 6-460
    Seal Type:
    Double Lip
    Bearings:
    Ball
    Pinion Material:
    Hardened Steel
    Gear Type:
    Worm
    Gear Material:
    Hardened and Ground Steel
    Worm Gear Material:
    Bronze
    Housing Material:
    Cast Iron
    Finish:
    Powdered Epoxy Paint
    Double Output
    Solid Output Shaft
    Output Shaft Diameter:
    1-1/4"
    Standards:
    AGMA
    MSRP: 53.43